Hangar Debrief
An email newsletter for builders, pilots and maintainers of experimental, light-sport and general aviation aircraft.
Past issuesSponsor Hangar Debrief

Design & Build
BRC Aircraft of Alberta buys Murphy Aircraft's parts stock; parts sales are planned for 2027
BRC Aircraft, a division of The Banff Rail Co. of Claresholm, Alberta, says it bought Murphy Aircraft's remaining parts and some tooling, but not the drawings or the right to build the designs. Parts sales are planned for 2027, as is, without warranty and without Murphy's service bulletins. Owners must register with proof of ownership first; the registration form isn't live yet.
9 Nov 2026

Design & Build
Vickers Aircraft USA announces the FAST4, a planned four-seat carbon-fiber single with a 235-knot cruise target
Vickers Aircraft USA, maker of the WAVE amphibian, has announced the FAST4, a low-wing, all-carbon-fiber four-seater with folding wings and a BRS parachute. Its targets are 235 knots true at maximum cruise, 1,300 nautical miles with four adults and full fuel, and a 1,520-pound useful load. Vickers names no engine, price or first-flight date; its posts report no WAVE delivered to a customer yet.
6 Nov 2026

Design & Build
EAA will build a Zenith CH 750 Super Cruzer at AirVenture 2027, July 26 to Aug. 1
EAA's fourth One Week Wonder will turn a Zenith CH 750 Super Cruzer kit into a finished airplane at Oshkosh, starting on AirVenture's opening day, July 26, 2027, with Aug. 1 as the goal. Visitors pull rivets that go in the builders' log. Experienced homebuilders and EAA's Homebuilding Ambassadors can sign up now.
4 Nov 2026

Design & Build
Murphy Aircraft has closed: what Rebel and Moose owners and builders can do now
Murphy Aircraft is reported insolvent and its Chilliwack shop was sold at auction on Oct. 22. Nobody has said who will support the designs. Airplanes already flying aren't grounded by the closure, and a builder's project isn't dead with it, but owners and builders should secure their manuals, drawings and payment records now.
2 Nov 2026

Design & Build
AC 43.13-1B, paragraph 4-57: rivet identification, edge distance, spacing and blind rivets
The FAA's AC 43.13-1B, paragraph 4-57, says how to read a rivet's part number and head marking, puts the minimum edge distance for a single row at two rivet diameters and spacing at three, and lists the places blind rivets are not to be used, among them control surfaces, hinges, wing attach fittings and fluid-tight areas.
26 Oct 2026

Design & Build
14 CFR part 22: light-sport category certification rules in effect since July 24, 2026
New light-sport category aircraft are now certificated under 14 CFR part 22, which sets no weight limit and allows airplanes with up to four seats and a stalling speed of up to 61 knots CAS. Aircraft certificated before July 24, 2026 keep their original limits, and a kit follows the standards in place when its statement of compliance was signed.
11 Oct 2026