Hangar Flying

Help
Start a panel layout

Configurator

Aspen Evolution

Displays

One card for each display on the panel. Choose its size, model and screen on the card; add as many as the panel holds. Everything else the system needs follows from them.

Aspen Avionics Evolution
Aspen Avionics Evolution3.5 × 7 in.
Model
Screen
Display installation kit and configuration module (one each for each display) Aspen E5 install manual 900-00041-001 Rev. F, figures 1-1, 1-2, §1.2

The mounting kit and configuration module each display needs, unless they come with the display as part of Aspen's system.

Remote sensor module (RSM), one for each display Choose one Aspen E5 install manual 900-00041-001 Rev. F, figures 1-1, 1-2

The remote sensor module mounts on the outside of the aircraft and gives the display magnetic heading, outside air temperature and, in one version, a backup GPS. Choose top or bottom mount for where it fits.

RSM installation kit (its cable's length) Choose one Aspen E5 install manual 900-00041-001 Rev. F, §1.2, table 1-6

The cable from the display to the remote sensor module. Choose the length that reaches from the panel to where the RSM mounts; the doubler reinforces the skin under it.

Optional

Extras: an analog converter unit connects the display to older radios and autopilots, the EA100 gives an autopilot the display's attitude, and the recess mount sets the display back in the panel.

Notes

Put it on your panel

Choose your aircraft's panel template and these displays and panel items are laid out on it for you, with this parts list on the design's bill of materials.

Create this panel design Panel templates