For most RV builders the panel is the longest stretch of the project that has nothing to do with sheet metal: choosing the equipment, laying out the panel, building the harness, then finding the wiring faults. Builders who didn't want to do it have long paid a panel shop to design and build one to order. Dynon's Advanced Flight Systems (AFS) division now offers a third way, a finished panel picked from a short menu, with the price on the web page. It calls the program ADVANCEDPANEL Express.
The airplanes at the start are the Van's RV-7/7A, RV-8/8A, RV-9/9A, RV-10 and RV-14/14A, and AFS says other kits will follow. Every Express panel is built on Dynon SkyView HDX displays, 10-inch or 12-inch (the RV-9 is offered with the 10-inch only), and arrives, in AFS's words, "machined, finished, wired, configured and bench tested as a complete assembly."

What comes in every panel
The page lists the same core in every configuration: SkyView HDX displays, each with its own backup battery; the SV-ADAHRS-200; the SV-EMS-220 engine monitor and sensor kit; a heated pitot tube with angle of attack; a two-axis autopilot with SV-42 servos, the SV-AP-PANEL and SV-KNOB-PANEL, and Tosten stick grips for both seats; the SV-XPNDR-263 transponder and SV-ADSB-472 ADS-B In receiver; an Aithre CO detector and a Wi-Fi adapter for a tablet. Behind the panel is the Advanced Control Module (ACM), AFS's wiring hub with electronic circuit breakers, plus front and rear airframe harnesses cut to reach the lights and other accessories, antennas with RG400 coax, and an ACK E-04 406 MHz ELT. The panel itself is CNC-cut aluminum, powder coated and labeled, and it comes with 11-by-17-inch color ACM wiring schematics and an installation manual.
The ACM is what makes a standard panel practical. Instead of a harness built from scratch for each airplane, every avionics box and the airframe harnesses plug into labeled connectors on one module, as the picture shows.
The configurations and prices
The configurations differ in displays, radios, audio and IFR navigation. For the RV-14, AFS lists:
- Base VFR, one SkyView HDX, one SV-COM-760 and an intercom: $33,650 with 10-inch screens, $34,650 with 12-inch.
- Super VFR, two displays, dual ADAHRS, two radios and the SV-AUDIO-6BTR audio panel: $43,950 and $45,950.
- Light IFR, adding an Avidyne IFD 410 GPS navigator and a Dynon D30 backup: $53,300 and $55,250.
- Full IFR, with an Avidyne IFD 440 GPS/NAV/COM in place of the IFD 410: $60,750 and $62,650.
The RV-10 has the same four, from $36,650 to $63,350, plus a fifth, "Delux IFR," with an IFD 540, at $65,100 and $67,000. The RV-9 runs from $33,822 to $61,450, depending on the configuration and on whether the airplane has a slider or tip-up canopy.
AFS says the prices reflect a 3 percent discount for check or cash and exclude sales tax and shipping; pickup at its shop in Canby, Oregon, is free. The supported ignitions (P-MAG, SureFly, Lycoming EIS, magnetos, LightSpeed) and lighting (FlyLEDs, AeroLEDs, Aveo, Whelen) are included; a custom powder coat or a dual alternator adds $250 each.
How it is ordered
There's no checkout. A builder picks the airplane, VFR or IFR, screen size and options on the page and sends the request, and an AFS specialist confirms the price, deposit and lead time before anything is ordered. The page gives no lead time. A builder who wants different avionics, a different layout or an ignition or lighting system not on the list moves to ADVANCEDPANEL Complete, AFS's custom program, which can also use the AFS AF-6600 display and is quoted design by design.
AvBrief reported that Dynon will send the remote hardware, the parts that mount away from the panel, ahead of time and take their cost off the panel at delivery. The Express page lists a separate early amount for each configuration but doesn't explain it in words.
Before choosing
An Express panel fixes most of the decisions: Dynon displays and radios, an Avidyne navigator for IFR, Tosten grips, the AFS switch modules. A builder who wants a Garmin navigator or a different layout is outside the Express menu. Builders comparing an Express panel with their own can lay out the same equipment for the RV-14, RV-10, RV-7/9 or RV-8 in Hangar Flying's Panel Designer, which has a SkyView HDX template for each.
Sources
- Advanced Flight Systems, ADVANCEDPANEL Express: configurations, equipment, prices and questions. Read November 19, 2026.
- AvBrief, Dynon Brings Flight-Ready Avionics Panels, November 19, 2026, the pointer to the program.
- Photo: Hangar Debrief.